Building Inspections Queens Park
Real Builders. Better Inspections.
Building & Pest Inspections by Real Builders (BP104751) | Queens Park’s #1 Rated Building Inspection Company with our Famous Price Beat Guarantee | Trusted by 30,000+ Perth Homeowners
Book Online in 30 Seconds
Secure your inspection date today and receive your detailed report within 24 hours.
✔️ Price Beat Guarantee
Or Start With a Free Custom Quote
Transparent Pricing | Price Beat Guarantee | Full Photo Comprehensive Reporting | Reports within 24 hours | Money Back Satisfaction Guarantee
INSPECTIONS BY REGISTERED BUILDERS
Queens Park’s #1 Rated Building and Pest Inspection
Queens Park sits about 11 km from the Perth CBD, on the Armadale and Thornlie-Cockburn rail lines. It was called Woodlupine until 1911, when the name changed to honour Queen Alexandra. The land was originally swampy, with flooded gums, paperbark and bulrushes, and it has eleven parks and a regional park today. Sister Kate’s children’s home, established in 1934, became the largest landholder in the suburb. The housing is now a real mix: older houses on established streets, and newer unit developments replacing old homes along Welshpool Road, including the Quatro and Skytown projects.
The three defect categories we see most in Queens Park homes are damp and drainage problems, cracking in older homes, and finishing defects in newer units. The suburb’s swampy history means water sits and moves through the ground, so we look hard at drainage, subfloor moisture and wall damp. Older houses show cracks in brickwork and slabs as the ground moves. Newer units and townhouses bring their own problems: rushed finishes, poor waterproofing and shared-wall issues.
Queens Park buyers are choosing between an older house on its own block and a newer unit, and each needs a different inspection. Our registered builders know what to look for in both. On older homes we focus on structure and moisture, and on units we check finishes, waterproofing and common property. You get a clear report within 24 hours.
The difference with WA Building Inspections is simple: our inspectors are licensed registered builders (BP104751). Real Builders. Better Inspections. That’s why over 30,000 Perth home buyers have trusted us.
What’s Included in Your Queens Park Building & Pest Inspection
Comprehensive Pre Purchase Building Inspections
Every Queens Park inspection is carried out by a licensed registered builder (BP104751), not a generalist with a checklist. We physically access roof voids, subfloors and external structures wherever it’s safe to do so, and we inspect against the building code our inspectors have spent their careers working under. On Queens Park’s older houses, our builder-inspectors focus on moisture, drainage and wall cracking, and on newer units and townhouses we check finishes, waterproofing and roof plumbing room by room.
Compliant with AS 4349.1–2007.
Termite & Pest Inspection Queens Park
A full timber pest inspection is included with every combined booking, not bolted on as an upsell. We check for active subterranean termite activity, evidence of past activity, termite conducive conditions, failed or expired chemical barriers, and wood borer activity across the property, fencing and outbuildings.
Queens Park has eleven parks, a regional park with native vegetation and older timber homes on established streets, so termite pressure is real. Damp ground also helps them. We inspect roof voids, fences, garden beds and timber features on every job.
Compliant with Australian Standard AS 4349.3–2010.
Detailed Photo Report
Your Queens Park report lands in your inbox within 24 hours of the inspection. It’s not a generic template. Every defect we identify is photographed, captioned and explained in plain English with the relevant Australian Standard or NCC clause cited where applicable. You’ll see exactly what the issue is, why it matters, and what it’s likely to cost to remediate. We also include a follow-up consultation call so you can walk through the findings with your inspector before any negotiation or settlement decisions.
Fixed Pricing, No Surprises
Queens Park Building Inspection Pricing
Building & Pest Inspection
MOST AFFORDABLE- ✔ Comprehensive Building & Pest Inspection Perth
- ✔ Report within 24 hours
- ✔ Based on 4×2 home
- ✔ Licensed & insured inspectors
- ✔ Money Back Guarantee
- ✔ Price Beat Guarantee
Advanced Building & Pest Inspection. Includes thermal imaging
MOST POPULAR- $999
- ✔ Advanced Comprehensive Building & Pest Inspection Perth with Thermographic Inspection
- ✔ Thermographic scan detects invisible leaks & moisture damage
- ✔ Identifies issues not visible to the naked eye
- ✔ Voted Perth’s Most Comprehensive Inspection
- ✔ Report within 24 hours
- ✔ Based on 4×2 home
- ✔ Licensed & insured inspectors
- ✔ Money Back Guarantee
- ✔ Price Beat Guarantee
- Prices exclude GST
What We’ve Found in Queens Park Properties
What Queens Park Clients Say
Frequently Asked Questions
How much does a building and pest inspection in Queens Park cost?
Our building and pest inspection in Queens Park is $499 + GST, fixed price, and it saves $99 + GST (approximately 16.6%) compared to booking the two separately, based on a 4×2 home. For buyers who want the most thorough inspection available, our Advanced Building & Pest Inspection is $799 + GST. Pricing is fixed with no travel surcharges across Queens Park, Welshpool, Bentley, Cannington and East Cannington and the surrounding south-eastern suburbs.
What does a building and pest inspection cover?
Our inspectors inspect more than your average inspector. How? We are qualified registered builders, so we go where the others won’t and we detect what the others can’t. Read more about what a full building and pest inspection covers.
How long does a building inspection in Queens Park take?
Most inspections take 2 to 3 hours, depending on the size, age and access of the home. Older homes, bigger blocks and homes with extensions or outbuildings take longer, because we inspect all of it. Your detailed photo report arrives within 24 hours.
Do I need a termite inspection in Queens Park?
Yes. Queens Park has older homes, plenty of parkland and native vegetation, and a swampy landscape history, all of which suit termites. A timber pest inspection is included in our building and pest package. See what termite damage looks like.
Which suburbs around Queens Park do you cover?
We cover all of Queens Park (6107) and the suburbs around it, including Welshpool, Bentley, Cannington and East Cannington. We inspect right across the South East & Canning and the rest of Perth.
Is a building inspection required when buying property in Western Australia?
It isn’t a legal requirement, but Consumer Protection WA recommends making your offer subject to a building inspection. Without one, you buy the home as it is. Make sure your contract includes a building inspection clause, and book the inspection within 2 to 3 business days of your offer being accepted so you have time to act on the report.
What should I look for when buying a home in Queens Park?
Check drainage and moisture first, because Queens Park was originally swampy country. Look for cracks in brickwork and slabs on older homes. On newer units and townhouses, test doors, windows and wet area finishes. Ask how old the building is, since the suburb has both established homes and new developments. Our checklist of what to check before buying covers the rest.
I’m building a new home in Queens Park. Do you offer new construction inspections?
Yes. We inspect new homes at every stage, from the slab through to handover. See our guide to construction stage inspections in WA, and use our PCI checklist before you take the keys. It’s far cheaper to have the builder fix defects before you move in than after.
Can you negotiate the price after a building and pest inspection?
Yes. A detailed report with photos and plain-English explanations gives you solid evidence to renegotiate the price or ask the seller to fix defects before settlement. Talk to your settlement agent early, because your building inspection condition has a deadline.
What makes WA Building Inspections different?
Our inspectors are licensed registered builders (BP104751). Real Builders. Better Inspections. We know how a home should have been built, not just how it looks, and we inspect to AS 4349.1 with a full timber pest inspection to AS 4349.3. Every report arrives within 24 hours, with a follow-up call to walk you through it.
Should I inspect a newer unit or townhouse in Queens Park?
Yes. Older houses along Welshpool Road are being replaced with unit developments, and newer builds can have finishing and waterproofing defects. We check finishes, wet areas, roof plumbing and the condition of shared elements, and we can inspect at practical completion on new builds.
How do I book a building inspector in Queens Park?
Book online at wabuildinginspections.com.au in under 60 seconds, or call 1300 23 63 63. Choose Queens Park, pick your inspection type and a time, and we’ll take it from there.
Other Queens Park Building Inspections
Construction Stage Inspections
Identify and document defects during construction, creating early evidence if issues later escalate into a dispute or SAT matter.
Defect Liability Report
The key stage where most disputes begin.
Documents defects during the warranty period, forming the foundation of your case if the builder refuses to rectify.



