Building Inspections Belmont
Real Builders. Better Inspections.
Building & Pest Inspections by Real Builders (BP104751) | Belmont’s #1 Rated Building Inspection Company with our Famous Price Beat Guarantee | Trusted by 30,000+ Perth Homeowners
Book Online in 30 Seconds
Secure your inspection date today and receive your detailed report within 24 hours.
✔️ Price Beat Guarantee
Or Start With a Free Custom Quote
Transparent Pricing | Price Beat Guarantee | Full Photo Comprehensive Reporting | Reports within 24 hours | Money Back Satisfaction Guarantee
INSPECTIONS BY REGISTERED BUILDERS
Belmont’s #1 Rated Building and Pest Inspection
Belmont sits about 7 km east of the Perth CBD in the City of Belmont, on a stretch of the Swan River’s southern bank. The land was granted to Captain Francis Henry Byrne in 1831 and is thought to take its name from his family estate in England, before Sydney businessman Shepherd Smith bought it in 1882 and subdivided it through the 1890s under the old Belmont Park Road Board. The suburb carried the name Belmont Park until it was shortened to Belmont in 1968, by which time it had grown into a working mix of industrial and commercial land to the west and more suburban, residential streets to the east and north, closer to the river.
The three defect categories we see most in Belmont homes are ageing roof structures in early 1900s homes, asbestos-cement materials from mid-century additions, and damp near the river and industrial-zone drainage. The oldest homes from the 1890s and early 1900s subdivisions often still carry original roof framing that needs a proper structural check. Additions and outbuildings from the mid-1900s commonly used asbestos-cement sheeting, especially in properties close to the older industrial areas. Blocks near the Swan River or the industrial west of the suburb can have drainage that wasn’t designed with today’s rainfall intensity in mind, so we check subfloor ventilation and site falls closely.
Belmont’s long industrial and residential history side by side means building standards and maintenance have varied a lot from block to block. Our registered builders cut through that variation and tell you exactly what you’re buying, with your report within 24 hours.
The difference with WA Building Inspections is simple: our inspectors are licensed registered builders (BP104751). Real Builders. Better Inspections. That’s why over 30,000 Perth home buyers have trusted us.
What’s Included in Your Belmont Building & Pest Inspection
Comprehensive Pre Purchase Building Inspections
Every Belmont inspection is carried out by a licensed registered builder (BP104751), not a generalist with a checklist. We physically access roof voids, subfloors and external structures wherever it’s safe to do so, and we inspect against the building code our inspectors have spent their careers working under. On Belmont’s early 1900s homes, our builder-inspectors check original roof framing against any later re-roofing, and on properties near the older industrial areas we look closely at drainage and any asbestos-cement in outbuildings and fencing.
Compliant with AS 4349.1–2007.
Termite & Pest Inspection Belmont
A full timber pest inspection is included with every combined booking, not bolted on as an upsell. We check for active subterranean termite activity, evidence of past activity, termite conducive conditions, failed or expired chemical barriers, and wood borer activity across the property, fencing and outbuildings.
Belmont’s mature gardens and century-old timber framing near the river give termites long, undisturbed access to older homes. We check subfloors, roof timbers and any timber structures close to garden beds and fencing.
Compliant with Australian Standard AS 4349.3–2010.
Detailed Photo Report
Your Belmont report lands in your inbox within 24 hours of the inspection. It’s not a generic template. Every defect we identify is photographed, captioned and explained in plain English with the relevant Australian Standard or NCC clause cited where applicable. You’ll see exactly what the issue is, why it matters, and what it’s likely to cost to remediate. We also include a follow-up consultation call so you can walk through the findings with your inspector before any negotiation or settlement decisions.
Fixed Pricing, No Surprises
Belmont Building Inspection Pricing
Building & Pest Inspection
MOST AFFORDABLE- ✔ Comprehensive Building & Pest Inspection Perth
- ✔ Report within 24 hours
- ✔ Based on 4×2 home
- ✔ Licensed & insured inspectors
- ✔ Money Back Guarantee
- ✔ Price Beat Guarantee
Advanced Building & Pest Inspection. Includes thermal imaging
MOST POPULAR- $999
- ✔ Advanced Comprehensive Building & Pest Inspection Perth with Thermographic Inspection
- ✔ Thermographic scan detects invisible leaks & moisture damage
- ✔ Identifies issues not visible to the naked eye
- ✔ Voted Perth’s Most Comprehensive Inspection
- ✔ Report within 24 hours
- ✔ Based on 4×2 home
- ✔ Licensed & insured inspectors
- ✔ Money Back Guarantee
- ✔ Price Beat Guarantee
- Prices exclude GST
What We’ve Found in Belmont Properties
What Belmont Clients Say
Frequently Asked Questions
How much does a building and pest inspection in Belmont cost?
Our building and pest inspection in Belmont is $499 + GST, fixed price, and it saves $99 + GST (approximately 16.6%) compared to booking the two separately, based on a 4×2 home. For buyers who want the most thorough inspection available, our Advanced Building & Pest Inspection is $799 + GST. Pricing is fixed with no travel surcharges across Belmont, Ascot, Redcliffe, Rivervale, Cloverdale and Kewdale and the surrounding Swan River suburbs east of Perth.
What does a building and pest inspection cover?
Our inspectors inspect more than your average inspector. How? We are qualified registered builders, so we go where the others won’t and we detect what the others can’t. Read more about what a full building and pest inspection covers.
How long does a building inspection in Belmont take?
Most inspections take 2 to 3 hours, depending on the size, age and access of the home. Older homes, bigger blocks and homes with extensions or outbuildings take longer, because we inspect all of it. Your detailed photo report arrives within 24 hours.
Do I need a termite inspection in Belmont?
Yes. Many Belmont homes date back to the 1890s and early 1900s subdivisions, with established gardens and original timber that termites can exploit. Our $499 + GST building and pest inspection checks subfloors and roof timbers, with your report within 24 hours. See what termite damage looks like.
Which suburbs around Belmont do you cover?
We cover all of Belmont (6104) and the suburbs around it, including Ascot, Redcliffe, Rivervale, Cloverdale and Kewdale. We inspect right across the Central Perth & Inner Suburbs and the rest of Perth.
Is a building inspection required when buying property in Western Australia?
It isn’t a legal requirement, but Consumer Protection WA recommends making your offer subject to a building inspection. Without one, you buy the home as it is. Make sure your contract includes a building inspection clause, and book the inspection within 2 to 3 business days of your offer being accepted so you have time to act on the report.
What should I look for when buying a home in Belmont?
Ask how old the home is, since Belmont ranges from 1890s originals to mid-century additions and later. Check outbuildings, fencing and old additions for asbestos-cement sheeting near the older industrial pockets. Look at drainage and site falls closely on blocks near the river or industrial west of the suburb. Get the roof void properly inspected rather than judging an older roof from the ground. Our checklist of what to check before buying covers the rest.
I’m building a new home in Belmont. Do you offer new construction inspections?
Yes. We inspect new homes at every stage, from the slab through to handover. See our guide to construction stage inspections in WA, and use our PCI checklist before you take the keys. It’s far cheaper to have the builder fix defects before you move in than after.
Can you negotiate the price after a building and pest inspection?
Yes. A detailed report with photos and plain-English explanations gives you solid evidence to renegotiate the price or ask the seller to fix defects before settlement. Talk to your settlement agent early, because your building inspection condition has a deadline.
What makes WA Building Inspections different?
Our inspectors are licensed registered builders (BP104751). Real Builders. Better Inspections. We know how a home should have been built, not just how it looks, and we inspect to AS 4349.1 with a full timber pest inspection to AS 4349.3. Every report arrives within 24 hours, with a follow-up call to walk you through it.
Belmont has a working industrial history close to residential streets. Does that affect what buyers should check?
Older Belmont properties near the industrial west of the suburb can have drainage and site conditions shaped by decades of nearby commercial use, which is worth understanding before you buy. It doesn’t mean avoiding these streets, but it does mean checking site drainage and any fill or made ground carefully. Our registered builders check exactly this as part of every Belmont inspection.
How do I book a building inspector in Belmont?
Book online at wabuildinginspections.com.au in under 60 seconds, or call 1300 23 63 63. Choose Belmont, pick your inspection type and a time, and we’ll take it from there.
Other Belmont Building Inspections
Construction Stage Inspections
Identify and document defects during construction, creating early evidence if issues later escalate into a dispute or SAT matter.
Defect Liability Report
The key stage where most disputes begin.
Documents defects during the warranty period, forming the foundation of your case if the builder refuses to rectify.



